Heavy Duty Adhesive

HEAVY DUTY ADHESIVE STRENGTH

Polymer modified mixture of high grade Portland Cement and fine Silica Sand for Superior Adhesion and Flexibility in a medium-bed setting. Used for walls and floors for all types of natural and manufactured stones.

BEST FOR

  • ARAAL¬†¬†
  • MARBLE
  • GRANITE
  • LIMESTONE
  • SAND STONE
  • WOOD STONE
  • TRAVERTINE
  • MACTAN STONE
  • BRICK
  • FIELD STONE
  • RIVER STONE
  • QUARRY TILE
  • STACK STONE
  • LEDGESTONE
  • CASTLESTONE
  • COBBLESTONE

SURFACE PREPARATION

Surface must be structurally sound, dry, clean and free from dirt, dust and other contaminants. to ensure proper bond, scour the bonding surface.

DIRECTION FOR USE

  1. Mix 25kg(1bag) of Heavy Duty Adhesive with 8 liters of clean water.
  2. Stir until a thick, pastry & lump free consistency is achieved. Prepare only sufficient quantity that can be applied within 1 hour.
  3. Spread the stone adhesive and comb with a notched trowel into the surface.
  4. Lay the stones on the surface. Press and bet the tiles on the setting bed.
  5. Clean excess mortar on surfaces, using a sponge and warn soapy water.
  6. Apply grout after 24 hours or until stones are held firmly in place.
  7. Wipe out excess grout on surfaces and apply sealer after stones are cleaned.

Do you have an ongoing design project? Contact us.

We strive to provide Our Customers with Top Notch Support to make your home a wonderful experience. Request a Quotation